The volume in the floor is larger than it looks
For an always-ready response, a saturated cushion holds roughly a gallon of water for every 10 square feet of floor.
Rooms and affected areas
Nationwide
Our always-ready team extracts water from carpet and padding, treats affected areas, and determines whether the flooring can be safely restored.
Signs to look for
With a crew geared up, if you notice any of these problems, call us before water has more time to spread into nearby materials.
For an always-ready response, a saturated cushion holds roughly a gallon of water for every 10 square feet of floor.
Because we answer at any hour, cut pile carpet wicks water up and evaporates from the tips, so the surface reads dry.
So mobilization stays on track, carpet pulls water outward and upward at the perimeter.
So mobilization stays on track, wet carpet gets heavy and pulls free of the tack strip pins.
For an always-ready response, seam tape is held with adhesive that softens when it stays wet.
So mobilization stays on track, latex adhesive between the face and the secondary backing breaks down as it stays wet.
What happens
Our always-ready team adjusts the work to what got wet, how far the water traveled, and which materials can be saved.
For an always-ready response, we check the pile, the pad and the subfloor with a moisture meter before starting.
So mobilization stays on track, a weighted extraction tool presses the carpet and cushion into the vacuum slot so water leaves the backing.
Because we answer at any hour, floating means detaching one edge and pushing air between the carpet and the cushion.
Because we answer at any hour, water concentrates at the walls and under the tack strip line, where a big tool cannot sit flat.
So mobilization stays on track, we keep tools off open seams and support loose edges instead of dragging on them.
With a crew geared up, air movers are positioned to sweep the surface or the space under a floated carpet, and an Professional dehumidifier removes that moisture from the air.
Talk with a restoration specialist
Describe the source, the impacted rooms, and when you first noticed the damage.
What to expect
Here is how we ordinarily handle carpet extraction near the United States.
So mobilization stays on track, say how much water is on the carpet, what it came from, and how many hours it has been there.
Your callFor an always-ready response, walking on soaked carpet drives water deeper into the pad and stresses the backing.
+5 minutesWith a crew geared up, a technician meters the pile, the pad and the subfloor and checks the seams and the tack strip.
On arrivalThe response response truck mounted extractor pulls the standing volume out of the assembly first. Most of the water in the room leaves during this stage.
First hour on siteBecause we answer at any hour, weighted and self propelled tools work the room in overlapping slow passes, then the perimeter and closets get detailed.
Day 1Because we answer at any hour, if we float, an edge is detached and air is pushed between the carpet and the pad.
Day 1, eveningBecause we answer at any hour, the same points get read every site call and logged, including the subfloor under the assembly. With a crew geared up, carpet is ordinarily the first layer to reach target and the deck the last.
Day 2 to 3Understanding the cost
With a crew geared up, we explain the recommended work and price before you approve the job. With a crew geared up, these examples show what may change the estimate.
| Common situation | What the estimate may include | Typical range |
|---|---|---|
| Carpet and pad extraction, one to two rooms, pad left in place | Nationwide cost range for the extraction stage only. Drying gear is billed separately per unit per day. | $350 to $1,000 |
| Carpet extraction priced by area, clean water | Nationwide cost range for the mechanical extraction stage on typical residential carpet and cushion. | $1 to $3 per square foot |
| Whole floor of wet carpet, three or more rooms | Nationwide cost range for extraction across a connected carpeted floor, before drying gear and cleaning. | $700 to $2,500 |
| Drying equipment only, one carpeted room, three days | Nationwide cost range for the gear line alone, based on typical air mover and dehumidifier day rates. | $300 to $700 |
| Hot water extraction cleaning after drying, per square foot | Nationwide cost range for cleaning and grooming the carpet once the assembly is verified dry. | $0.25 to $0.60 |
| Reattach and stretch a floated carpet, per square foot | Nationwide cost range covering laying the carpet back on the tack strip, stretching and minor seam repair. | $0.60 to $1.50 |
Square footage of wet carpet
We measure the wet area with a meter, which is in many cases smaller than the room. Water spreads unevenly and stops where the pad stops taking it.
How saturated the pad is
A damp assembly takes a couple of passes. A pad holding standing water takes many slow passes and more gear days.
Float versus pad removal
Floating keeps your carpet and pad in place and saves material cost.
Carpet construction
So mobilization stays on track, cut pile releases water readily under a weighted tool.
Access and furniture
For an always-ready response, stairs, tight hallways and heavily furnished rooms slow the tool down. So mobilization stays on track, moving and blocking contents is labor before extraction even starts.
Equipment days
Air movers run roughly $25 to $40 per unit per day and Professional dehumidifiers roughly $70 to $110 per unit per day.
Why timing counts
For an always-ready response, water can keep moving into nearby materials even when the surface looks dry.
So mobilization stays on track, latex adhesive holding the face to the secondary backing softens and lets go when it stays wet.
So mobilization stays on track, older carpets and many rugs use jute backing, which shrinks hard as it dries.
So mobilization stays on track, seam tape adhesive fails after a day or two under water.
So mobilization stays on track, as the assembly dries, water travels up through the fibers and carries old soil with it.
Helpful service information
Because we answer at any hour, start with the short explanation. For an always-ready response, open a card if you want a little more detail.
For an always-ready response, the slot has to seat flat so it seals against the secondary backing, because that is the layer holding the water.
With a crew geared up, carpet extraction is decided at the vacuum slot. For an always-ready response, the slot has to seat flat so it seals against the secondary backing, because that is the layer holding the water.
Because we answer at any hour, one edge comes off the tack strip, then an air mover is aimed into the gap so dry air travels between the carpet and the pad.
With a crew geared up, floating a carpet is the technique that saves both layers. Because we answer at any hour, one edge comes off the tack strip, then an air mover is aimed into the gap so dry air travels between the carpet and the pad.
The face yarn is tufted through a primary backing, then a secondary backing is bonded on with latex adhesive.
Carpet is built in layers, and water attacks the glue between them. The face yarn is tufted through a primary backing, then a secondary backing is bonded on with latex adhesive.
Help near you
Choose your area below, or call (888) 657-0846 and describe what happened.
You may also need
Our always-ready team removes saturated carpet padding when it cannot be safely dried, helping shield subflooring and reduce lingering odor.
Get a Quote: (888) 657-0846Our always-ready team uses professional extraction gear to remove water from flooring and building materials before detailed drying begins.
Get a Quote: (888) 657-0846Our always-ready team extracts water from upholstered furniture and cushions, then uses controlled drying to reduce staining, odor, and hidden moisture.
Get a Quote: (888) 657-0846Our always-ready team removes surface water and dries moisture trapped beneath finished flooring to shield the subfloor and surrounding materials.
Get a Quote: (888) 657-0846Our always-ready team dries walls, floors, framing, and other wet materials using balanced airflow, dehumidification, and repeat moisture level numbers.
Get a Quote: (888) 657-0846Our always-ready team removes standing water in short order, limits added damage, and prepares affected rooms for controlled drying and cleanup.
Get a Quote: (888) 657-0846Our always-ready team removes standing water from floors and low areas, then checks nearby materials for hidden moisture and begins drying.
Get a Quote: (888) 657-0846Our always-ready team removes water, damaged materials, and residue, then cleans and dries affected rooms so repair work can move forward.
Get a Quote: (888) 657-0846Common questions
Because we answer at any hour, ordinarily yes when the water was clean and we reach it within a day or two. With a crew geared up, extraction, drying and cleaning bring most carpet back.
For an always-ready response, we detach one edge from the tack strip and blow air between the carpet and the pad.
Because we answer at any hour, water cleanliness first, then how saturated the cushion is, then the value of the carpet.
Because we answer at any hour, the extraction itself is ordinarily a few hours on one to two rooms. For an always-ready response, drying the assembly in most cases takes three days.
So mobilization stays on track, a shop vacuum handles surface water up to about an inch and never reaches the backing.
So mobilization stays on track, yes. For an always-ready response, foot traffic drives water deeper into the cushion and stresses the backing and the seams.
For an always-ready response, it is the face of the carpet separating from its secondary backing, because the latex adhesive between them failed.
Talk with a restoration specialist
Describe the source, the impacted rooms, and when you first noticed the damage.
Areas we serve
With a crew geared up, identify your state to reach restoration assessment, extraction, cleanup, and drying service in your area.
View the area on Google Maps