Emergency water removal

Nationwide

Water Extraction in the United States

Our always-ready team uses professional extraction gear to remove water from flooring and building materials before detailed drying begins.

Restoration phone support around the clock
Residential and commercial loss response
Measured extraction, cleanup, and drying
One restoration team from assessment to dry standard

Call (888) 657-0846 Browse services

Signs to look for

When to call us for water extraction

With a crew geared up, if you notice any of these problems, call us before water has more time to spread into nearby materials.

The floor is damp again an hour after you dried it

Because we answer at any hour, water moves back to the surface from the padding and the subfloor as soon as you stop working.

Water is sitting in grout lines, seams or expansion joints

For an always-ready response, tile, vinyl plank and sealed concrete look dry within minutes while water stays in the joints and under the covering.

Hardwood is cupping or the planks feel tight

Because we answer at any hour, cupping means the underside of each board is absorbing water and swelling.

Standing water is deeper than about two inches

With a crew geared up, extractors are built for water inside materials, not for volume.

Vinyl or laminate flooring is lifting or feels spongy

With a crew geared up, these coverings act as a vapor barrier, so water underneath cannot evaporate upward at all. For an always-ready response, the covering ordinarily has to be lifted so the subfloor can be extracted and dried.

Your shop vac tank keeps filling and the floor still reads wet

With a crew geared up, gallons removed is the honest measure of progress, and a small tank empties long before an assembly does.

What happens

How we handle water extraction

Our always-ready team adjusts the work to what got wet, how far the water traveled, and which materials can be saved.

Response response response truck mounted extraction

A response response truck mounted system runs from the vehicle with long hose runs into the building, producing far more vacuum lift and airflow than any portable unit.

Portable extractors for upper floors and tight access

With a crew geared up, where a hose cannot reach, portable extractors go up stairs, into elevators and through high rise corridors.

Submersible and trash pumps for depth

So mobilization stays on track, standing water beyond a couple of inches gets pumped, not extracted, because pumps move volume far faster. With a crew geared up, trash pumps handle water carrying debris or silt.

Weighted and self propelled extraction tools

For an always-ready response, a weighted or self propelled extractor presses down on carpet with real weight while vacuuming, which squeezes water out of the padding beneath.

Hard surface tools and squeegee heads

So mobilization stays on track, tile, sealed concrete, vinyl and stone need tools that seal against a flat surface and pull water out of joints and low spots.

Sub surface and subfloor extraction

For an always-ready response, where water sits between flooring layers, we reach it through small drilled openings or a lifted section rather than tearing out the whole floor.

Talk with a restoration specialist

Water loss in the United States?

Describe the source, the impacted rooms, and when you first noticed the damage.

Call (888) 657-0846

What to expect

What to expect from our always-ready team

Here is how we ordinarily handle water extraction near the United States.

1
Assessment and depth check

So mobilization stays on track, we measure standing depth, identify every material holding water, and decide which tools the job needs.
Hour 0 to 1
2
Pumping bulk volume down

So mobilization stays on track, submersible or trash pumps take standing water out first, because pumps move volume much faster than extractors.
Hour 1
3
Gross extraction pass

The response response truck mount runs with wide tools to remove the bulk of the remaining water from flooring.
Hour 1 to 3
4
Slow weighted pass on carpet and pad

So mobilization stays on track, a technician makes deliberate, overlapping passes with a weighted tool, pausing on each spot so the pad releases its water.
Hour 2 to 4
5
Hard surface and detail extraction

So mobilization stays on track, squeegee tools clear tile, vinyl and concrete, including grout lines, thresholds and under toe kicks.
Hour 3 to 4
6
Sub surface, cavity and specialty extraction

With a crew geared up, where readings show water between layers or inside a wall, we extract through small openings and set cavity airflow.
Hour 4 to 6
7
Verification readings

With a crew geared up, we re meter the same marked points and compare against a dry area of the same structure.
Hour 6

Understanding the cost

What can affect the price

With a crew geared up, we explain the recommended work and price before you approve the job. With a crew geared up, these examples show what may change the estimate.

Common situation	What the estimate may include	Typical range
Carpet and pad extraction, one to two rooms, pad left in place	Nationwide cost range for the extraction stage only. Drying gear is billed separately per unit per day.	$350 to $1,000
Standard extraction pricing by area, clean water	Nationwide cost range for the mechanical extraction stage on typical residential flooring.	$1 to $3 per square foot
Pump out plus extraction after several inches of standing water	Nationwide cost range. Includes pumping the depth down, gross extraction and detail passes across a floor level.	$800 to $3,000
Hardwood floor panel drying system with monitoring	Nationwide cost range. Specialty panels and dehumidification typically run seven to fourteen days with daily readings.	$1,500 to $5,000
Upholstery or mattress extraction, per item	Nationwide cost range for clean water only. Items soaked with contaminated water are removed rather than extracted.	$75 to $300

Square footage actually extracted
With a crew geared up, pricing follows the area holding water, which we map with meters before quoting.
Standing depth and pumping needs
Depth is a volume problem and gets pumped, in many cases billed separately from extraction. Deep basements and crawl spaces can take hours of pumping before extraction starts.
Flooring type and assembly
Sealed concrete and tile are the cheapest to extract. Carpet with padding takes weighted passes, vinyl and laminate ordinarily need lifting, and hardwood needs a panel system.
Pad in place versus pad removal
Because we answer at any hour, extracting a pad where it lies is cheaper than removing it, but it only works with clean water caught early.
Specialty extraction systems
Hardwood floor mat systems and wall cavity drying are billed as specialty gear, typically per day, and they run longer than standard drying.
Water cleanliness
Clean water extraction is straightforward. Gray water adds sanitizing and protective gear, and drain or sewage water means porous materials are removed rather than extracted at all.

Why timing counts

What can happen when the area stays wet

For an always-ready response, water can keep moving into nearby materials even when the surface looks dry.

Drying takes two or three times as long

With a crew geared up, every gallon left behind has to be evaporated into the air and then pulled out by a dehumidifier, which is a slow, energy intensive process.

Wet padding keeps refeeding the floor

With a crew geared up, padding that was never extracted holds water against the carpet and the subfloor for days.

Subfloor and sheet goods delaminate

Because we answer at any hour, plywood layers separate and particleboard swells and crumbles once water sits between the layers.

Hardwood cupping becomes permanent

For an always-ready response, wood that swells and then dries too slowly or unevenly can crown, gap or crack. So mobilization stays on track, caught in short order and dried with a panel system, most floors come back.

Helpful service information

What to know about water extraction

Because we answer at any hour, start with the short explanation. For an always-ready response, open a card if you want a little more detail.

What is happening inside the property

Vacuum lift, rated in inches of water lift, is the suction pressure a machine can generate, and airflow is how much air it moves.

Read the explanation

Extraction gear is measured in two ways. Vacuum lift, rated in inches of water lift, is the suction pressure a machine can generate, and airflow is how much air it moves.

How the next step is decided

A low grain refrigerant dehumidifier removes a modest number of gallons from the air in a full day of operation.

Read the explanation

The economics of extraction come down to one comparison. A low grain refrigerant dehumidifier removes a modest number of gallons from the air in a full day of operation.

What may change the work

Carpet with pad responds to weighted tools that compress the assembly while vacuuming.

Read the explanation

Different materials require different extraction strategies, and the tool choice is most of the expertise. Carpet with pad responds to weighted tools that compress the assembly while vacuuming.

Help near you

Water Extraction near the United States

Choose your area below, or call (888) 657-0846 and describe what happened.

Available in Alabama

You may also need

Related water-damage services

Water Removal

Our always-ready team removes standing water in short order, limits added damage, and prepares affected rooms for controlled drying and cleanup.

Get a Quote: (888) 657-0846

Emergency Water Extraction

Our always-ready team rapidly extracts standing water, checks hidden moisture, and starts drying to limit damage after sudden leaks or flooding.

Get a Quote: (888) 657-0846

Carpet Water Extraction

Our always-ready team extracts water from carpet and padding, treats affected areas, and determines whether the flooring can be safely restored.

Get a Quote: (888) 657-0846

Carpet Padding Removal

Our always-ready team removes saturated carpet padding when it cannot be safely dried, helping shield subflooring and reduce lingering odor.

Get a Quote: (888) 657-0846

Standing Water Removal

Our always-ready team removes standing water from floors and low areas, then checks nearby materials for hidden moisture and begins drying.

Get a Quote: (888) 657-0846

Water Damage Drying

Our always-ready team dries walls, floors, framing, and other wet materials using balanced airflow, dehumidification, and repeat moisture level numbers.

Get a Quote: (888) 657-0846

Structural Drying

Our always-ready team uses air movement, dehumidification, and moisture moisture watch to dry framing and building materials beyond the visible surface.

Get a Quote: (888) 657-0846

Hardwood Floor Water Removal

Our always-ready team extracts water from hardwood flooring and uses controlled drying to reduce cupping, warping, and moisture trapped below the boards.

Get a Quote: (888) 657-0846

Common questions

Questions about water extraction

What is the difference between water extraction and water removal?

For an always-ready response, water removal is the whole job of getting water out of a building, including pumping, extraction, tear out and drying.

Is extraction the same as drying?

With a crew geared up, no, and mixing them up is the most common mistake we see. Because we answer at any hour, extraction physically pulls out liquid water in hours.

Can I just rent a carpet cleaner or use a shop vac?

For an always-ready response, you can, and it will help with a small spill on a hard surface.

How much water can you actually remove?

A response response truck mounted system can recover hundreds of gallons in an hour under good conditions, while a typical dehumidifier removes a limited number of gallons in a whole day.

Do you have to pull up my carpet?

For an always-ready response, in many cases not. Because we answer at any hour, if the water was clean and we reach it in short order, we can extract the pad where it lies with weighted tools and keep everything in place.

Can wet carpet padding be saved?

For an always-ready response, sometimes, with clean water and fast extraction, though it always extends the drying time compared with replacing it.

How long does extraction take?

For an always-ready response, most residential extractions run two to six hours, depending on area, depth and flooring type. With a crew geared up, pumping deep water can add an hour or more before extraction even begins.

Talk with a restoration specialist

Water loss in the United States?

Describe the source, the impacted rooms, and when you first noticed the damage.

Call (888) 657-0846

Areas we serve

Water-damage help across the United States

With a crew geared up, identify your state to reach restoration assessment, extraction, cleanup, and drying service in your area.

View the area on Google Maps

Water Extraction in the United States

When to call us for water extraction

The floor is damp again an hour after you dried it

Water is sitting in grout lines, seams or expansion joints

Hardwood is cupping or the planks feel tight

Standing water is deeper than about two inches

Vinyl or laminate flooring is lifting or feels spongy

Your shop vac tank keeps filling and the floor still reads wet

How we handle water extraction

Response response response truck mounted extraction

Portable extractors for upper floors and tight access

Submersible and trash pumps for depth

Weighted and self propelled extraction tools

Hard surface tools and squeegee heads

Sub surface and subfloor extraction

Water loss in the United States?

What to expect from our always-ready team

Assessment and depth check

Pumping bulk volume down

Gross extraction pass

Slow weighted pass on carpet and pad

Hard surface and detail extraction

Sub surface, cavity and specialty extraction

Verification readings

What can affect the price

What can happen when the area stays wet

Drying takes two or three times as long

Wet padding keeps refeeding the floor

Subfloor and sheet goods delaminate

Hardwood cupping becomes permanent

What to know about water extraction

What is happening inside the property

How the next step is decided

What may change the work

Water Extraction near the United States

Water Extraction in Alabama

Water Extraction in Alaska

Water Extraction in American Samoa

Water Extraction in Arizona

Water Extraction in Arkansas

Water Extraction in California

Water Extraction in Colorado

Water Extraction in Connecticut

Water Extraction in Delaware

Water Extraction in District of Columbia

Water Extraction in Florida

Water Extraction in Georgia

Water Extraction in Guam

Water Extraction in Hawaii

Water Extraction in Idaho

Water Extraction in Illinois

Water Extraction in Indiana

Water Extraction in Iowa

Water Extraction in Kansas

Water Extraction in Kentucky

Water Extraction in Louisiana

Water Extraction in Maine

Water Extraction in Maryland

Water Extraction in Massachusetts

Water Extraction in Michigan

Water Extraction in Minnesota

Water Extraction in Mississippi

Water Extraction in Missouri

Water Extraction in Montana

Water Extraction in Nebraska

Water Extraction in Nevada

Water Extraction in New Hampshire

Water Extraction in New Jersey

Water Extraction in New Mexico

Water Extraction in New York

Water Extraction in North Carolina

Water Extraction in North Dakota

Water Extraction in Northern Mariana Islands

Water Extraction in Ohio

Water Extraction in Oklahoma

Water Extraction in Oregon

Water Extraction in Pennsylvania

Water Extraction in Puerto Rico

Water Extraction in Rhode Island

Water Extraction in South Carolina