Emergency water removal
Nationwide
Our always-ready team removes moisture from the air and wet materials, helping walls, flooring, and framing dry more evenly and completely.
Signs to look for
With a crew geared up, if you notice any of these problems, call us before water has more time to spread into nearby materials.
With a crew geared up, condensation forms when humid air touches a surface at or below its dew point. Because we answer at any hour, in a drying space it means the air is carrying more water than the gear is removing.
So mobilization stays on track, a dry looking surface with heavy air means moisture is still moving out of the materials.
Because we answer at any hour, small units are rated for a few pints per day at comfortable conditions.
With a crew geared up, paper responds to humidity faster than almost anything else in a building.
With a crew geared up, closed spaces have the least air exchange and the highest relative humidity.
Because we answer at any hour, moisture moving through masonry carries minerals to the surface and leaves them behind.
What happens
Our always-ready team adjusts the work to what got wet, how far the water traveled, and which materials can be saved.
For an always-ready response, we read the affected area, an unaffected area and outside the building. So mobilization stays on track, those temperature and humidity readings let our standby desk know what we are fighting before any unit is positioned.
So mobilization stays on track, dehumidifier sizing comes from the cubic feet of the space and how wet and dense the materials are.
So mobilization stays on track, a low grain refrigerant dehumidifier condenses water out of the air on a cold coil and drains it away.
With a crew geared up, a specialized dehumidifier uses silica gel to pull air far drier than a refrigerant dehumidifier can.
So mobilization stays on track, windows and exterior doors stay shut so the gear controls a known volume of air. With a crew geared up, that lets us plan the air changes per hour the space needs.
For an always-ready response, every unit is run to a drain, a sink or a condensate pump.
Talk with a restoration specialist
Describe the source, the impacted rooms, and when you first noticed the damage.
What to expect
Here is how we ordinarily handle dehumidification near the United States.
With a crew geared up, room sizes, ceiling height, what kind of floors and walls, and how the building is heated or cooled.
Your callFor an always-ready response, a technician takes temperature and humidity in the wet area, in an unaffected room and outdoors.
On arrivalFor an always-ready response, we calculate the volume in cubic feet, weigh the material load, and place the units.
First hours on siteSo mobilization stays on track, windows and exterior doors are shut, interior doors are set, and drainage is run. With a crew geared up, from here the gear controls a known volume of air.
Day 1With a crew geared up, each unit is checked for how much moisture it is pulling out of the air passing through it.
Day 1, eveningWith a crew geared up, we log the numbers daily and compare them to the day before.
Day 2For an always-ready response, as the air holds less water, fewer units are needed to hold the space dry. Because we answer at any hour, pulling gear early is normal and it lowers your bill.
Day 3 to 4Understanding the cost
With a crew geared up, we explain the recommended work and price before you approve the job. With a crew geared up, these examples show what may change the estimate.
| Common situation | What the estimate may include | Typical range |
|---|---|---|
| Professional dehumidifier, per unit per day | Nationwide cost range. One unit typically serves a wet room, and larger areas need several. | $70 to $110 |
| Specialized dehumidifier, per day | Nationwide cost range for smaller portable and towable units. Trailer mounted systems on large losses cost more. | $200 to $500 |
| Typical home dehumidification, two units for four days | Nationwide cost range including placement, drainage and daily readings. Air movers and extraction are separate. | $700 to $1,600 |
| Whole floor or open plan dehumidification, four to six days | Nationwide cost range. Volume and ceiling height move this range more than square footage does. | $2,000 to $6,000 |
| Large commercial or dense material drying with desiccant support, per day | Nationwide cost range covering the desiccant unit, ducting and supporting refrigerant gear. | $600 to $1,500 |
| Electricity per dehumidifier per day | Nationwide cost range depending on local rates and unit size. Air movers add a smaller amount each. | $2 to $7 |
Room volume in cubic feet
So mobilization stays on track, dehumidifier sizing follows air volume, not floor area.
How wet and how dense the materials are
Carpet and drywall give up water in short order and create a heavy early load. Hardwood, plaster and concrete release slowly, which extends the days rather than the unit count.
Refrigerant versus desiccant equipment
So mobilization stays on track, an Professional dehumidifier covers most homes at a moderate day rate.
Electrical capacity in the building
Each unit needs its own circuit headroom. Older panels sometimes limit how much gear can run, which stretches the schedule.
Outdoor conditions and season
With a crew geared up, humid outdoor air raises the load every time a door opens.
Drainage and setup complexity
So mobilization stays on track, a nearby sink makes drainage simple. So mobilization stays on track, long hose runs, a condensate pump, or upper floor placement all add setup labor.
Why timing counts
For an always-ready response, water can keep moving into nearby materials even when the surface looks dry.
Because we answer at any hour, air movers pull moisture out of your materials and hand it to the air.
Because we answer at any hour, damp materials in humid air can support mold within 24 to 48 hours.
Because we answer at any hour, a unit that cannot reach a useful grain depression runs all week without result.
Because we answer at any hour, on a humid day, outdoor air carries more water than the room does.
Helpful service information
Because we answer at any hour, start with the short explanation. For an always-ready response, open a card if you want a little more detail.
For an always-ready response, air movers lower the vapor pressure at a wet surface, which lets water leave the material and enter the room air.
So mobilization stays on track, drying is a two step handoff and dehumidification is step two. For an always-ready response, air movers lower the vapor pressure at a wet surface, which lets water leave the material and enter the room air.
With a crew geared up, relative humidity is a percentage of what the air could hold at its current temperature, so it changes when temperature changes even if nothing dried.
With a crew geared up, the numbers are simpler than they sound. With a crew geared up, relative humidity is a percentage of what the air could hold at its current temperature, so it changes when temperature changes even if nothing dried.
An Professional dehumidifier condenses moisture on a cold coil and works well in normal indoor temperatures, which covers most home losses.
Refrigerant and desiccant machines solve different problems. An Professional dehumidifier condenses moisture on a cold coil and works well in normal indoor temperatures, which covers most home losses.
Help near you
Choose your area below, or call (888) 657-0846 and describe what happened.
You may also need
Our always-ready team dries walls, floors, framing, and other wet materials using balanced airflow, dehumidification, and repeat moisture level numbers.
Get a Quote: (888) 657-0846Our always-ready team uses air movement, dehumidification, and moisture moisture watch to dry framing and building materials beyond the visible surface.
Get a Quote: (888) 657-0846Our always-ready team tracks moisture level numbers during drying and adjusts gear when needed so wet materials continue moving toward a verified dry condition.
Get a Quote: (888) 657-0846Our always-ready team uses meters and thermal imaging to find hidden moisture, mark affected areas, and guide a focused drying plan.
Get a Quote: (888) 657-0846Our always-ready team controls the source, removes water, protects contents, and stabilizes wet materials to head off avoidable secondary damage.
Get a Quote: (888) 657-0846Our always-ready team removes standing water in short order, limits added damage, and prepares affected rooms for controlled drying and cleanup.
Get a Quote: (888) 657-0846Our always-ready team finds moisture inside walls and uses targeted drying or controlled removal to shield framing and nearby finishes.
Get a Quote: (888) 657-0846Our always-ready team pumps out crawl-space water, removes wet debris or insulation, and dries framing to control moisture beneath the home.
Get a Quote: (888) 657-0846Common questions
So mobilization stays on track, because of how much water is still in the building, and how much capacity it takes to catch it.
Because we answer at any hour, for a damp basement in summer, yes. For an always-ready response, for a water loss, no, because home units are rated for a few pints per day in comfortable conditions and cannot handle the load.
So mobilization stays on track, lGR stands for low grain refrigerant. So mobilization stays on track, it is a refrigerant dehumidifier with an extra heat exchanger, which lets it keep pulling water out of air that is already fairly dry.
For an always-ready response, a specialized dehumidifier passes air over silica gel, which absorbs moisture without needing a cold coil. With a crew geared up, it can dry air far below what refrigerant gear reaches.
Because we answer at any hour, it comes from the volume of the affected space in cubic feet and how wet the materials are.
With a crew geared up, for ordinary materials we generally hold the drying space between about 30 and 50 percent relative humidity. For an always-ready response, above 60 percent, materials stop releasing moisture efficiently and microbial risk climbs.
So mobilization stays on track, relative humidity tells you how full the air is compared to what it could hold at that temperature.
Talk with a restoration specialist
Describe the source, the impacted rooms, and when you first noticed the damage.
Areas we serve
With a crew geared up, identify your state to reach restoration assessment, extraction, cleanup, and drying service in your area.
View the area on Google Maps